Call us now: 01246 925226

5-6 Seat Jacuzzi Square Base Foundation

Jacuzzi Base

5-6 Seat Jacuzzi Base

  • Plastic base measures 231cm x 231cm 
  • Suitable for 5-6 Seat Jacuzzi Hot tubs & Swim Spas.
  • 49 Qty Panels 33cms x 33cms:
  • Base Dims:  231cms x 231cms:
  • 40mm Depth
  • Manufactured from Recycled Plastic:
  • Strong & Durable:
  • Quick & Easy to Install:
  • Water and Rot resistant:
  • Tested by Lloyds British to 420t / Sqm. 

More details...

£ 98.00


Availability : In Stock Ready To Ship

401 items in stock

| About The Plastic Jacuzzi Base? | Will This Foundation Work With My Jacuzzi? | How Will I Install This Base? |


About The Plastic Jacuzzi Base

Manufactured here in the UK and made entirely from recycled polyolefin, our bases are Lloyds British tested to be able to withstand up to 420 tonnes per square metre. As well as being incredibly tough our bases are very easy to put down and can be done easily without any professional training at all. Suitable for all types of spas, our spas are effective regardless of what is placed on them.

Jump To Top


Will This Foundation Work With My Jacuzzi?

Our bases are suitable for all makes and models of Jacuzzi's, Hot Tub's and Spas. One of our major selling points is the fact that our base can be used across all makes and models so we don't ignore any part of the spa market. This particular base size is perfect for the following Jacuzzi J Series; J-465, J-345, J-LX and J-LXL. Should you have a different Jacuzzi then look through our full range of bases.

Jump To Top


How Will I Install This Base?

Our bases are incredibly easy to install;

1. Identify your Jacuzzi Base area and remove the existing turf to depth of 70mm so the base is flush with the existing turf or ground surrounding when the installation is complete.

2. Lay a sheet of membrane in the excavated area and secure using membrane u-pins. The membrane allows water to flow away but stops weeds and unwanted plants growing through the base.

3. Lay a bedding layer approximately 30mm deep using 5-20mm diameter angular gravel or crushed aggregate and compact well to ensure the layer is solid and level.

4. Starting in one corner, lay your Jacuzzi Base panels onto your newly created flat surface. Lay and click the panels together as you move away from the corner until you have filled the full area.

5. Once laid, fill the entire base with a suitable angular gravel or pea shingle to create a solid surface to lay your Jacuzzi. 8kgs of gravel are required to fill each panel.

For assistant in installing your Hot Tub Base please read our Install Guide.

To see how our past customers have used our base to create a base for their Jacuzzi, read all of our Jacuzzi Base Blogs.

Jump To Top

4 other products in the same category :


No products

£ 0.00 Shipping
£ 0.00 Total

Cart Check out